Q. What type of light technology does LightCop utilize?
A. LightCop is built on a platform of LED (light emitted diode) technology. When used as directed, there are no environmental or personal safety concerns. LightCop utilizes a CREE emitter.
Q. What is a GOBO?
A. GOBO is an acronym for GO BEFORE OPTICS. It is a glass and metal “slide” that is put in front of a light source and creates the image that is emitted through the lens of the projector.
Q. How large of an image can the LightCop project?
A. Image size is a function of both the size of the image on the GOBO and the projection or broadcast distance. We can make GOBOs that project surface images from 24 inches to over 6 feet. The small images are typically used in safe walkways, while the large images work very well in the center of intersections to signal heavy equipment operators and visible to those on intersection crosswalks. Of course there are numerous applications throughout all facilities.
Q. Can LightCop be used in harsh environments where airborne particulate matter is common?
A. Yes. LightCop is built to an IP-65 rating which means that it is a completely sealed system such that the projector components are kept free of dust, debris or moisture. It comes in a very robust industrial casing and built to withstand the rigors of industry.
Q. What is the best projection distance for LightCop?
A. While the LightCop can be mounted over a wide range of distances, 18-24 feet seem to be the sweet spot for brightness and clarity.
Q. What can be done if the ambient light is such that the image created by LightCop seems washed out?
A. We offer a more powerful LightCop2 which has twice the light output and routinely used in areas with excessive ambient light. There are also numerous ways to reconfigure the mounting to get LightCop's projected image
closer to the delivered space.
Q. How difficult is installation of LightCop?
A. Light is a very simple plug and play system and easy to install or reposition. It comes with all the mounting hardware as well as a safety tether. There is also an installation video available on this website.
Q. Can I deactivate the radar system if I want to project a solid image at all times?
A. Yes. In fact there is a radar 'on and off' switch that is used to enable or disable the radar feature.
Q. When in radar mode, is there a way to adjust the distance that the radar detects motion and begins the flash sequence?
A. Yes. Inside the unit behind the lens, next to the GOBO retaining ring, there is a knob used to adjust the radar field.
Q. How often will the light source (LED) need to be replaced?
A. The LED in the LightCop is rated for 45,000 hours (5 years) of continuous service. It is very cost effective.
Q. Is the DockRight Laser safe?
A. Yes, DockRight is perfectly safe when used as directed. The DockRight Laser is classified as a 3r laser device. Lasers within this classification DO NOT require the use of safety goggles or protective skin covering, and FDA cleared for use in the workplace.
Q. What colors can be striped using DockRight?
A. The DockRight comes in two stock colors, green and red. Blue may be available by special order at an additional cost.
Q. Can the DockRight be mounted outside to create dock lanes at night?
A. Yes. The DockRight has an IP-65 rating meaning it is completely sealed, free from contamination by particulate matter in the air, or moisture. It functions well in most environments, both inside and outside.
Q. How long of a line can the DockRight stripe?
A. Typical rule of thumb for striping an interior line, such as a walkway, you will get twice the length of line on the floor as the height it is mounted. So, mounted 40 feet up and pointed straight down at the ground. you would get a line of approx. 80 feet. When mounted at an angle, such as the night time docking application, a line can be striped in excess of 200 feet.
Q. How long will the DockRight laser diode function before needing to be replaced?
A. DockRight is rated for 18,000 (2+years) but that can be greatly increased by only turning on the system when needed, especially true in docking areas.
Q. How complicated is the installation (mounting) of the DockRight?
A. The DockRight is a plug and play system, and very easy to mount. The mounting hardware consists of a wall plate with a universal joint for fine tuning the projection of the line being striped.